REPAIRS FOR SERPENTINE 496 (GEN 7) PUMPS

THE TWO PUMPS SHOWN ARE THE NEWER SERPENTINE BELT DRIVE TYPE GEN7.

BOTH USE THE SMALLER SHAFT (1/2") WITH THE DOUBLE OR TWO-FLAT HUBS

UNDER MOST CASES IF THE IMPELLER FAILS A STANDARD REPAIR KIT WILL WORK.

PART # IM496

HOWEVER MANY PUMPS GET WORN ON THE END SURFACES IN THE BRASS BODY

AS SHOWN ON THE REAR PLATE BELOW.

IF YOUR END SURFACES LOOK LIKE THE PICTURE ABOVE YOU WILL NEED THE REBUILD KIT INSTEAD