|
|
TRAILERS AS WORLD'S LOWEST PRICES |
|
|
TRANSOM REPAIR KITS FOR MERCRUISER YOKE REPAIR KITS SHIFT CABLE KITS PLUS INSTILLATION INSTRUCTIONS |
|
|
|
|
|
Alternators used for Mercruiser Usually Delco alternators or Mando alternators for direct replacement also to replace older Prestolite alternators or Motorola alternators
|
 |
Alternators used for O.M.C, Usually Delco alternators or Mando alternators for direct replacement also to replace older Prestolite alternators or Motorola alternators |
 |
Alternators used for Volvo Penta Usually Delco alternators or Mando alternators for direct replacement also to replace older Prestolite alternators or Motorola alternators |
 |
Alternators used for Other applications can use Delco alternators or Mando alternators for replacement also to replace older Prestolite alternators or Motorola alternators |
 |
Replacements for Delco Alternators,Yanmar Alternators, ,Valeo Alternators,Paris Rhone Alternators,Hitachi Alternators |
 |
REPLACEMENT FOR 224 C.I.D. FACTORY STATOR/VR SYSTEM. All parts necessary to convert to conventional alternator including bracket, pulley, alternator, belt, and wiring. Fits all FWC models 470-170-180-185-165-190 |
 |
Aluminum fuel tanks for above floor applications. These tanks have fuel fill openings with vented caps. Measurements do not include filler neck in overall height |
 |
Aluminum fuel tanks for below floor applications. These tanks have fuel fill,vent and electric sender included. Measurements do not include filler neck in overall height |
 |
Aluminum fuel tanks for Bow(front) mounting. These tanks have fuel fill,vent,and electric sender included. Measurements do not include filler neck in overall height. |
 |
Aluminum fuel tanks built to your specifications. Includes filler necks,vents to your design, baffles and electric senders included |
 |
Side saddle mount fuel tanks. These tanks have fuel fill,vent and electric sender. Measurements do not include filler neck in overall height |
 |
ALUMINUM FUEL TANKS TUBE TANK 6" HT MADE FROM A 60" ROLL OF ALUMINUM SO THE END MEASURES 60" AROUND WITH THE ADVANTAGE OF NO WASTE IN MATERIAL THEREFORE THE LENGTH DETERMINES THE CAPACITY AND PRICE. IT IS SOLD WITH A MINIMUM OF 10" IN LENGTH HOLDING 8-1/2 GALLON. THE LENGTH CAN BE CUSTOM EXTENDED TO YOUR SPECS IN 5" SECTIONS TO ADD 4-1/4 GALLONS PER ADDITION. THERE ARE FIVE END SIZE CONFIGURATIONS WHICH ALL USE THE SAME MATERIAL. BUILT BY RDS ALUMINUM TANKS IT COMES WITH FILLER NECK, VENT, AND GAUGE 12 VOLT SENDER. AVAILABLE IN OB VERSION W VENTED CAP.
|
 |
ALUMINUM FUEL TANKS TUBE TANK 8" HT MADE FROM A 60" ROLL OF ALUMINUM SO THE END MEASURES 60" AROUND WITH THE ADVANTAGE OF NO WASTE IN MATERIAL THEREFORE THE LENGTH DETERMINES THE CAPACITY AND PRICE. IT IS SOLD WITH A MINIMUM OF 10" IN LENGTH HOLDING 8-1/2 GALLONS. THE LENGTH CAN BE CUSTOM EXTENDED TO YOUR SPECS IN 5" SECTIONS TO ADD 4-1/4 GALLONS PER ADDITION. THERE ARE FIVE END SIZE CONFIGURATIONS WHICH ALL USE THE SAME MATERIAL. BUILT BY RDS ALUMINUM TANKS IT COMES WITH FILLER NECK, VENT, AND GAUGE 12 VOLT SENDER. AVAILABLE IN OB VERSION W VENTED CAP. |
 |
ALUMINUM FUEL TANKS TUBE TANK 10" HT MADE FROM A 60" ROLL OF ALUMINUM SO THE END MEASURES 60" AROUND WITH THE ADVANTAGE OF NO WASTE IN MATERIAL THEREFORE THE LENGTH DETERMINES THE CAPACITY AND PRICE. IT IS SOLD WITH A MINIMUM OF 10" IN LENGTH HOLDING 8-1/2 GALLONS. THE LENGTH CAN BE CUSTOM EXTENDED TO YOUR SPECS IN 5" SECTIONS TO ADD 4-1/4 GALLONS PER ADDITION. THERE ARE FIVE END SIZE CONFIGURATIONS WHICH ALL USE THE SAME MATERIAL. BUILT BY RDS ALUMINUM TANKS IT COMES WITH FILLER NECK, VENT, AND GAUGE 12 VOLT SENDER. AVAILABLE IN OB VERSION W VENTED CAP. |
 |
ALUMINUM FUEL TANKS TUBE TANK 12" HT MADE FROM A 60" ROLL OF ALUMINUM SO THE END MEASURES 60" AROUND WITH THE ADVANTAGE OF NO WASTE IN MATERIAL THEREFORE THE LENGTH DETERMINES THE CAPACITY AND PRICE. IT IS SOLD WITH A MINIMUM OF 10" IN LENGTH HOLDING 8-1/2 GALLONS. THE LENGTH CAN BE CUSTOM EXTENDED TO YOUR SPECS IN 5" SECTIONS TO ADD 4-1/4 GALLONS PER ADDITION. THERE ARE FIVE END SIZE CONFIGURATIONS WHICH ALL USE THE SAME MATERIAL. BUILT BY RDS ALUMINUM TANKS IT COMES WITH FILLER NECK, VENT, AND GAUGE 12 VOLT SENDER. AVAILABLE IN OB VERSION W VENTED CAP. |
 |
ALUMINUM FUEL TANKS TUBE TANK 14" HT MADE FROM A 60" ROLL OF ALUMINUM SO THE END MEASURES 60" AROUND WITH THE ADVANTAGE OF NO WASTE IN MATERIAL THEREFORE THE LENGTH DETERMINES THE CAPACITY AND PRICE. IT IS SOLD WITH A MINIMUM OF 10" IN LENGTH HOLDING 8-1/2 GALONS. THE LENGTH CAN BE CUSTOM EXTENDED TO YOUR SPECS IN 5" SECTIONS TO ADD 4-1/4 GALONS PER ADDITION. THERE ARE FIVE END SIZE CONFIGURATIONS WHICH ALL USE THE SAME MATERIAL. BUILT BY RDS ALUMINUM TANKS IT COMES WITH FILLER NECK, VENT, AND GAUGE 12 VOLT SENDER. AVAILABLE IN OB VERSION W VENTED CAP. |
 |
ANODES/TRIM TABS FOR MERCRUISER ZINC TRIM TAB ZINC ANODES FOR MERCRUISER FOR FINS, ZINC FOR RAMS, ZINC ANODES FOR TRIM LINES, ZINC SACRIFICIAL ANODES FOR CAVITATION PLATE, ANODES FOR CARRIERS AND ADD ON ANODES |
 |
ANTENNAS AND ANTENNA BASES |
 |
|
 |
|
 |
|
|
SEALED GIMBAL BEARING FOR MERCRUISER REPLACES LINK BELT |
|
 |
|
 |
Mercruiser Universal joint bellows boot; #1-ABC bellows boot, # 1 bellows, Alpha 1 bellows boot, Alpha 1 Gen 2 bellows boot, and Bravo bellows boot,exhaust bellows boot inside and out and connector boots |
 |
Rubber bellows to fit O.M.C. Cobra.Universal jount bellows, exhaust bellows and shift cable bellows |
 |
Rubber bellows to fit Volvo universal joint, exhaust bellows with internal flap and exhaust bellows without internal flap |
 |
Rubber transom seals to fit older OMC Stringer sterndrives. Have either 16 or 22 mounting holes |
 |
Bilge blowers for 3" or 4" hose.12 volt. Used to bring fresh air into motor box to avoid explosion hazard.** Will not act as a supercharger for automobiles.** |
 |
500 GPH with 3/4"-7/8" output hose fitting 2200 GPH with 1"-1 1/8" out put hose fitting |
 |
SURE BAIL BILGE PUMP SWITCH |
 |
BOAT LEVELER HYDRAULIC TRIM TABS--BY INSTA TRIM Complete kits with single or dual ram configurations. Stainless trim plates. Installer friendly with hydraulic pump,rams and switches ALL GENUINE Boat leveler insta trim parts at discount prices. insta trim is a brand of boat leveler (hydraulic trim plates with electric trim motor) HOW TO INSTALL |
|
FOR REPAIR OF DAMAGED SET WHERE TABS ARE STILL GOOD Complete kits without stainless trim plates. .Installer friendly with hydraulic pump,rams and switches ALL GENUINE Boat leveler insta trim parts at discount prices. insta trim is a brand of boat leveler (hydraulic trim action with electric trim pump motor)
|
 |
Hydraulic pumps,rams,switches,hardware,wiring harness. All parts to repair INSTA TRIM BOAT LEVELER SETS at discounted prices.100% Boat Leveler trim parts ALL GENUINE Boat leveler insta trim parts at discount prices. insta trim is a brand of boat leveler (hydraulic trim plates with electric trim pump motor) |
 |
Designed to replace competitors pumps such as Bennett. Includes all fittings,wire harness adapter and instructions. ALL GENUINE Boat leveler insta trim parts at discount prices. insta trim is a brand of boatleveler (hydraulic trim plates with electric trim pump motor) |
 |
Marine vinyl covers.Made for V(pointed)or Tri(square) inboard/outboard boats from 17'-21' (custom boat covers at discount prices. we buy our covers from a quality source but accept whichever color boat cover he selects which gives us the highest quality at the lowest price but the color of our boat storage cover is not optional) |
 |
Marine vinyl covers.Made for V(pointed)or Tri(square) outboard boats from 17'-21' (custom boat covers at discount prices. we buy our covers from a quality source but accept whichever color boat cover he selects which gives us the highest quality at the lowest price but the color of our boat storage cover is not optional) |
 |
Zinc plated boat trailer dolly with removable caster |
 |
 |
Rebuild kit for Mercruisers with Holley carburetor with 2 or 4 barrels.Used on Ford engines |
 |
Rebuild kit for Mercruisers with Mercarb carburetor with 3/4" or 5/8" accelerator pump plunger |
 |
Rebuild kit for engines with Rochester carburetor with 2 barrels. To fit V-6 or V-8 engines |
 |
Rebuild kit for engines with Rochester carburetor with 2 barrels. To fit inline 120, 140, 165 Mercruiser, fwc 170/470/165 4 cyl, or 2 bbl on V6-V8
|
|
Rebuild kit for engines with Rochester carburetor with 4 barrels. To fit V-6 & V-8
|
 |
Remanufactured Rochester 2 barrell carburetors for inline Chevrolet engines |
 |
Remanufactured Rochester 2 barrell carburetors for V-6 and V-8 Chevrolet engines |
 |
Remanufactured Rochester 4 barrell carburetors for V-6 and V-8 Chevrolet engines.Small block or big block
|
|
|
Remanufactured Rochester 2 barrell carburetors for V-8 FORD engines.Used in Mercruiser applications |
||||||||||||||||||||||||||||||||
|
MERCRUISER COUPLER IM850 |
CHEVY 4-6 CYL COUPLERS, V-8 CRANK MOUNTED COUPLERS, CONVERSION COUPLERS, AND TRIANGLE FLYWHEEL MOUNTED COUPLERS MERCRUISER STYLE ENGINE COUPLERS ARE MADE TO THE HIGHEST SPECTS. REPLACEMENTS FOR IN LINE COUPLERS AND V-8 COUPLERS , GOBLET STYLE COUPLERS AND TRIANGLE FLYWHEEL MOUNTED FLEX PLATE COUPLERS | ||||||||||||||||||||||||||||||||
 |
New circulating water pumps for inline, V-6 and V-8 Chevrolet Engines CLICK ABOVE TO SEE DISCOUNT PRICES ON MARINE CIRCULATING PUMPS FOR MERCRUISER,O.M.C.,VOLVO, INDNMAR, PLEASURECRAFT AND MARINE POWER. |
||||||||||||||||||||||||||||||||
|
|
New circulating water pumps for V-8 small block Ford CLICK ABOVE TO SEE DISCOUNT PRICES ON MARINE CIRCULATING PUMPS FOR MERCRUISER,O.M.C.,VOLVO, INDNMAR, PLEASURECRAFT AND MARINE POWER |
||||||||||||||||||||||||||||||||
|
|
AQUA METER ENSIGN COMPASS | ||||||||||||||||||||||||||||||||
|
|
DEPTH FINDER IN DASH INSIDE MOUNT DEPTH FINDER / DASH TRANSOM MOUNT |
||||||||||||||||||||||||||||||||
  |
Petronix Electronic ingnition conversion kit for Mercruiser applications with 4 cyl and 6 cyl in line engines CLICK ON THE ABOVE LINKS TO SEE DISCOUNTED PRICED ON ELECTRIC CONVERSION KITS FOR MERCRUISER,OMC,VOLVO AND OTHER ENGINES |
||||||||||||||||||||||||||||||||
 |
Petronix Electronic ingnition conversion kit for Mercruiser applications with v-6 & v-8 engines CLICK ON THE ABOVE LINKS TO SEE DISCOUNTED PRICED ON ELECTRIC CONVERSION KITS FOR MERCRUISER,OMC,VOLVO AND OTHER ENGINES |
||||||||||||||||||||||||||||||||
 |
Petronix Electronic ingnition conversion kit for Marine Power, Inmar,Pleasurecraft, Volvo or O.M.C applications with V-8 CLICK ON THE ABOVE LINKS TO SEE DISCOUNTED PRICED ON ELECTRIC CONVERSION KITS FOR MERCRUISER, O.M.C.,VOLVO AND OTHER ENGINES |
||||||||||||||||||||||||||||||||
 |
VHF RADIO | ||||||||||||||||||||||||||||||||
 |
C D PLAYER | ||||||||||||||||||||||||||||||||
 |
New Chevrolet 181cid base or complete marine engines |
||||||||||||||||||||||||||||||||
 |
New Chevrolet 181cid base or complete marine engines |
||||||||||||||||||||||||||||||||
 |
New Chevrolet 181cid base or complete marine engines |
||||||||||||||||||||||||||||||||
 |
EXHAUST SEE MANIFOLDS BELOW |
||||||||||||||||||||||||||||||||
 |
FILTER KITS AND REFILLS |
||||||||||||||||||||||||||||||||
 |
New Chevrolet INLINE PUMPS |
||||||||||||||||||||||||||||||||
 |
New Chevrolet V-6 and V-8 |
||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
FOR MERCRUISER |
||||||||||||||||||||||||||||||||
 |
FOR MERCRUISER |
||||||||||||||||||||||||||||||||
 REPAIR |
GEAR (upper) SETS FOR MERCRUISER MERCRUISER #1 ALPHA AND GEN II |
||||||||||||||||||||||||||||||||
 |
GEAR HOUSING (upper) PARTS FOR MERCRUISER MERCRUISER #1 ALPHA AND GEN II |
||||||||||||||||||||||||||||||||
 |
GEAR(lower) SETS FOR MERCRUISER MERCRUISER #1 ALPHA AND GEN II |
||||||||||||||||||||||||||||||||
 |
GEAR HOUSING (lower) PARTS FOR MERCRUISER MERCRUISER #1 ALPHA AND GEN II |
||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
GEAR SETS FOR O.M.C. (LOWER) STRINGER | ||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||
|
|
GEAR HOUSINGS FOR O.M.C. (LOWER) |
||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
GEAR HOUSING SMALL PARTS FOR O.M.C. COBRA 1986-1993 MODELS WITH ("U" JOINTS ON SHAFT) DRIVE |
||||||||||||||||||||||||||||||||
 |
BOW EYES, STERN EYES, TOW RINGS |
||||||||||||||||||||||||||||||||
 |
HINGES |
||||||||||||||||||||||||||||||||
 |
CHOCKS |
||||||||||||||||||||||||||||||||
 |
CLEATS |
||||||||||||||||||||||||||||||||
 |
FUEL FILL ANS VENTS |
||||||||||||||||||||||||||||||||
 |
ROD OR POLE HOLDERS |
||||||||||||||||||||||||||||||||
 |
CHAIN AND COATED CHAIN |
||||||||||||||||||||||||||||||||
 |
FOR MERCRUISER |
||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
FOR MERCRUISER #1 OUTDRIVE OR ALPHA OUTDRIVE GENII DRIVE |
||||||||||||||||||||||||||||||||
 |
FOR MERCRUISER #1 OUTDRIVE OR ALPHA OUTDRIVE GENII DRIVE |
||||||||||||||||||||||||||||||||
|
|
WHAT CAP AND ROTOR DO I HAVE ? WHAT CAP AND ROTOR DO I HAVE ? |
||||||||||||||||||||||||||||||||
|
|
CAP, ROTOR, CONDENSER, POINTS |
||||||||||||||||||||||||||||||||
|
|
IGNITION / TUNE UP KIT W / WIRES TUNE UP KIT PLUS MAGSTAR WIRE SET |
||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||
|
|
IGNITION / HEI TUNE UP KIT/WIRES MERCRUISER V-6 & V-8 HIGH ENERGY KITS PLUS MAGSTAR WIRE SET |
||||||||||||||||||||||||||||||||
 |
MERCURY MERCRUISER HOW TO REPAIR |
||||||||||||||||||||||||||||||||
 |
O.M.C. STRINGER |
||||||||||||||||||||||||||||||||
 |
O.M.C. COBRA |
||||||||||||||||||||||||||||||||
 |
O.M.C. OUTBOARD / JOHNSON-EVINRUDE |
||||||||||||||||||||||||||||||||
 |
MERCURY OUTBOARD |
||||||||||||||||||||||||||||||||
 |
12 VOLT TRANSFER AND MACERATOR PUMPS |
||||||||||||||||||||||||||||||||
 |
CAST IRON REPLACEMENTS FOR MERCRUISER ENGINES INLINE 4 CYL |
||||||||||||||||||||||||||||||||
|
CAST IRON REPLACEMENTS FOR MERCRUISER ENGINES INLINE 6 CYL |
||||||||||||||||||||||||||||||||
 |
CAST IRON REPLACEMENTS FOR MERCRUISER |
||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
CAST IRON REPLACEMENTS FOR MERCRUISER V-8 SMALL BLOCK |
||||||||||||||||||||||||||||||||
|
MANIFOLDS V-8 S.B. / EXHAUST ALUMINUM REPLACEMENTS FOR MERCRUISER V-8 SMALL BLOCK |
||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
CAST IRON REPLACEMENTS FOR MERCRUISER V-8 BIG BLOCK |
||||||||||||||||||||||||||||||||
|
MANIFOLDS V-8 B.B. / EXHAUST ALUMINUM REPLACEMENTS FOR MERCRUISER V-8 BIG BLOCK |
||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
MANIFOLDS / EXHAUST REAR RISER 888-233 H.P. CAST IRON REPLACEMENTS FOR MERCRUISER ENGINES V-8 FORD 302/351 |
||||||||||||||||||||||||||||||||
 |
MANIFOLDS / EXHAUST REAR RISER 225/260 H.P. CAST IRON REPLACEMENTS FOR MERCRUISER ENGINES V-8 CHEVY 305/350 |
||||||||||||||||||||||||||||||||
 |
MANIFOLDS / EXHAUST CENTER RISER GENERIC SETS FOR 302/351 FORD OR SMALL BLOCK CHEVY CAST IRON REPLACEMENTS FOR ALL ENGINES | ||||||||||||||||||||||||||||||||
 |
CAST IRON REPLACEMENTS FOR MERCRUISER ENGINES ALL TYPES |
||||||||||||||||||||||||||||||||
 |
CAST KIT TO LIFT EXHAUST ELBOW WATER LEVEL TO PREVENT EXHAUST WATER INTRUSION. |
||||||||||||||||||||||||||||||||
 |
CAST KIT TO CONNECT EXHAUST ELBOW TO EXHAUST TUBES WHEN CENTER RISER MANIFOLDS ARE USED TO REPLACE REAR RISER. TWO ELBOWS, HOSE & CLAMPS |
||||||||||||||||||||||||||||||||
 |
SERVICE MANUALS FOR MERCRUISER, O.M.C. ,& VOLVO. |
||||||||||||||||||||||||||||||||
 |
SERVICE MANUALS FOR MERC, JOHNSON EVINRUDE, MARINER |
||||||||||||||||||||||||||||||||
 |
SERVICE MANUALS FOR PERSONAL WATERCRAFT, SEA-D00, KAWASIKI,YAMAHA, AND POLARIS |
||||||||||||||||||||||||||||||||
 |
MANUALS JET DRIVES AND CRYSLER/FORCE/YAHAMA SERVICE MANUALS FOR MERCURY/ FORCE, CRYSLER, YAMAHA, AND JET DRIVES |
||||||||||||||||||||||||||||||||
 |
GASKET REPLACEMENTS FOR MERCRUISER ENGINES ALL TYPES |
||||||||||||||||||||||||||||||||
 |
ELBOW GASKET REPLACEMENTS FOR MERCRUISER ENGINES ALL TYPES |
||||||||||||||||||||||||||||||||
 |
ONNECTS TO OIL PAN DRAIN AND ALLOWS FOR REMOVAL OF OIL CLEANLY THROUGH THE BOAT DRAIN HOLE |
||||||||||||||||||||||||||||||||
 |
COMPLETE DRIVES AND EMPTY SHELLS FOR MERCRUISER UPPER HALF DRIVE SHAFT HOUSING |
||||||||||||||||||||||||||||||||
 |
COMPLETE DRIVES AND EMPTY SHELLS FOR MERCRUISER UPPER HALF GEAR HOUSING |
||||||||||||||||||||||||||||||||
 |
COMPLETE DRIVES AND EMPTY SHELLS FOR O.M.C. STRINGER UPPER HALF DRIVE SHAFT HOUSING | ||||||||||||||||||||||||||||||||
 |
COMPLET DRIVES AND EMPTY SHELLS FOR O.M.C. STRINGER LOWER HALF GEAR HOUSING |
||||||||||||||||||||||||||||||||
 |
REPLACEMENT MOTORS FOR TRIM PUMPS MERCRUISER CHECKING TRIM SYSTEM |
||||||||||||||||||||||||||||||||
 |
REPLACEMENT MOTORS FOR TRIM PUMPS O.M.C. STRINGER MODELS 78-85 |
||||||||||||||||||||||||||||||||
 |
REPLACEMENT MOTORS FOR TRIM PUMPS O.M.C. COBRA MODELS 86-93 |
||||||||||||||||||||||||||||||||
 |
REPLACEMENT MOTORS FOR TRIM PUMPS MERCURY / MARINER FORCE OUTBOARD |
||||||||||||||||||||||||||||||||
 |
REPLACEMENT MOTORS FOR TRIM PUMPS O.M.C. JOHNSON / EVINRUDE OUTBOARDS |
||||||||||||||||||||||||||||||||
 |
3 BLADE POLISHED STAINLESS HIGH PERFORMANCE |
||||||||||||||||||||||||||||||||
 |
3 BLADE ALUMINUM REPLACEMENT PROPS |
||||||||||||||||||||||||||||||||
 |
TOP MOUNT |
||||||||||||||||||||||||||||||||
 |
PANEL MOUNT |
||||||||||||||||||||||||||||||||
 |
EXPOSED OUTSIDE MOUNT |
||||||||||||||||||||||||||||||||
 |
EXPOSED TOP MOUNT |
||||||||||||||||||||||||||||||||
 |
HIGH PERFORMANCE TOP MOUNT |
||||||||||||||||||||||||||||||||
 |
OIL, TEMP, FUEL |
||||||||||||||||||||||||||||||||
 |
SHAFTS / DRIVE PROPELLER/SHIFT MERCRUISER |
||||||||||||||||||||||||||||||||
 |
MERCRUISER |
||||||||||||||||||||||||||||||||
 |
SHAFTS / DRIVE PROPELLER/SHIFT O.M.C. STRINGER |
||||||||||||||||||||||||||||||||
 |
SHAFTS / DRIVE PROPELLER/SHIFT O.M.C. COBRA |
||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
LOWER SHIFT CABLES FOR O.M.C. | ||||||||||||||||||||||||||||||||
 |
MERCRUISER-OMC-VOLVO |
||||||||||||||||||||||||||||||||
|
INBOARD |
|||||||||||||||||||||||||||||||||
 |
DIESEL |
||||||||||||||||||||||||||||||||
|
OUTBOARD MERCURY |
|||||||||||||||||||||||||||||||||
|
OUTBOARD JOHNSON EVINRUDE |
|||||||||||||||||||||||||||||||||
 |
OUTBOARD OTHERBRANDS |
||||||||||||||||||||||||||||||||
 |
PERSONAL WATERCRAFT KAWASAKI |
||||||||||||||||||||||||||||||||
 |
PERSONAL WATERCRAFT YAMAHA |
||||||||||||||||||||||||||||||||
 |
PERSONAL WATERCRAFT SEA-DOO |
||||||||||||||||||||||||||||||||
 |
PERSONAL WATERCRAFT TIGER SHARK |
||||||||||||||||||||||||||||||||
 |
PERSONAL WATERCRAFT POLARIS |
||||||||||||||||||||||||||||||||
 |
PERSONAL WATERCRAFT HONDA |
||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
 |
OUTBOARD MOTORS MERCURY |
||||||||||||||||||||||||||||||||
 |
OUTBOARD MOTORS JOHNSON / EVINUDE |
||||||||||||||||||||||||||||||||
 |
PERSONAL WATERCRAFT FOR KAWASAKI,POLARIS,YAMAHA,SEA-DOO, TIGER SHARK |
||||||||||||||||||||||||||||||||
 |
FOR BOATS WITH SPACE BEHIND THE DASH FOR THE RACK (12" BOTH WAYS) DETRIOT MARINE STEERING OR DET-MAR STEERING IS THE MOST PROBLEM FREE STEERING SYSTEM SOLD WITH WHEEL FOR DISCOUNT PRICE LESS THAN MOST PEOPLE SELL STEERING RACK AND PINION CABLE ONLY, EVERYTHING TO REPLACE ENTIRE STEERING ASSEMBLY |
||||||||||||||||||||||||||||||||
 |
FOR BOATS WITH NO SPACE BEHIND THE DASH FOR THE RACK (12" LEFT OF CTR) UFLEX ROTARY STEERING USES PLANETARY TRIPPLE GEARS TO MAKE THIS ROTARY STEERING THE BEST, EVERY THING FOR THE ROTARY STEERING IS INCLUDED IN THE BOX SMOOTH EFFORTLESS ROTARY BOX AND LONGER LASTING STEERING CABLES BECAUSE IT IS PUSHED AT THREE LOCATIONS ONT ONE REPLACES MOORSE AND TELEFLEX STEEERING. |
||||||||||||||||||||||||||||||||
|
UFLEX HYDRAULIC STEERING WITH HYDRAULIC HOSES & PUMP |
ALL PARTS INCLUDING HOSES, UFLEX HYDRAULIC STEERING IS EFFORTLESS HELM DRIVEN STEERING WITH THREE OPTIONAL TYPES OF HYDRAULIC RAMS. ONE OUTBOARD HYDRAULIC MOUNTS ACROSS THE OUTBOARD ENGINE, ONE I/O HUDRAULIC STEERING MOUNTE THRUOGH THE MARINE STEERING TUBE FROM THE SIDE, ONE IS FOR INBOARD TILLER APPLICATIONS WHERE THE PILLAR BLOCK MOUNTED HYDRAULIC CYLLINDER PUSHES FROM A STRINGER ON COMMERCIAL MARINE INSTILLATIONS. |
||||||||||||||||||||||||||||||||
|
TELEFLEX HYDRAULIC STEERING WITH HYDRAULIC HOSES & PUMP |
ALL PARTS INCLUDING HOSES RATED TO HIGH SPEED THIS HYDRAULIC STEERING FITS ALL OUTBOARD MARINE APPLICATIONS INCLUDES HYDRAULIC CYLINDER, HYDRAULIC PUMP AND SPECIAL HP HOSES |
||||||||||||||||||||||||||||||||
 |
WHITE PLASTIC |
||||||||||||||||||||||||||||||||
 |
WHITE PLASTIC |
||||||||||||||||||||||||||||||||
 |
TOOLS TO FIX OR REPAIR MERCRUISER |
||||||||||||||||||||||||||||||||
 |
KITS TO RE-SEAL AND REBUILD BORG WARNER 71 OR 72 SERIES TRANSMISSION |
||||||||||||||||||||||||||||||||
 |
12 VOLT WASH DOWN PUMPS | ||||||||||||||||||||||||||||||||
 |
KITS TO REPLACE ALL BELLOWS FOR MERCRUISER |
||||||||||||||||||||||||||||||||
 |
KITS TO REPLACE YOKE, U-JOINTS, AND SEALS |
||||||||||||||||||||||||||||||||
 |
KITS TO REPLACE ALL BELLOWS FOR O.M.C. COBRA |
||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||
|
SUPER WINCH 200 |
GENUINE SUPER WINCH BRAND WINCH FOR PULLING ATVS UNTO A TRAILER |
||||||||||||||||||||||||||||||||
|
SUPER WINCH 4500 |
GENUINE SUPER WINCH BRAND WINCH FOR PULLING BOATS UNTO A TRAILER |
||||||||||||||||||||||||||||||||
|
SUPER WINCH 1000 |
GENUINE SUPER WINCH BRAND WINCH FOR LIFTING 120 V |
||||||||||||||||||||||||||||||||
|
SUPER WINCH 940 |
GENUINE SUPER WINCH BRAND WINCH FOR PULLING TRUCKS OUT OF A RUT |
||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||
| A SMALL STORY ABOUT OUR HISTORY |
|
||||||||||||||||||||||||||||||||
| VISIT OTHER SITES |
|
